- Description
- Downloads
- Parameters
- Dimensions
Remote access removes boundaries, eliminates the need for time consuming site visits and provide a network infrastructure suitable for today’s “always-on” society. The MR-270 mobile broadband GPRS / EDGE / 3G router uses the Internet to cost effectively inter-connect systems, allowing HMI, PLCs, sensors etc to communicate with each other.
The dual SIMs ensures high availability for critical applications. Bundle the mobile broadband GPRS with ADSL devices, Falcon or DR-260, for both wired and wireless access.
Devices connected to the Internet require countermeasures towards cyber threats. The MR-270 offers protection of transmissions from malicious eavesdroppers via encrypted communication tunnels (VPN, included), access prevention from unauthorized addresses, and extensive logging to detect intrusion attempts. With an advanced and highly configurable firewall the unit is easily set up to only allow valid application data.
The MR-270 with its built-in serial port offers a simple modem replacement solution with the benefit of not having to reprogram or change any other component. The powerful software in the MR-270 offers methods to engineers to easily analyze the data-flow, valuable for fast troubleshooting of connected devices.
The MR-270 supports GSM, GPRS, EDGE, 3G, HSPA, and is equipped with one serial port and four Ethernet ports.
current tab: Downloads
Technical data
| Status: | Active |
| Article number: | 3622-0205 |
| Ports: | 4 x 10 Mbit/s or 100 Mbit/s., Ethernet TX, RJ-45. 1 x 300 bit/s to 115.2 kbit/s, D-sub, RS-232. 2 x SIM slots. 1 x USB. |
| Description: | Mobile broadband router |
| Warranty period: | 5 Years |
| R&TTE: | Article 3.1a EN 60950, Safety EN 50385, EMF exposure Article 3.1b EN 301 489-1, ERM/EMC EN 301 489-7, ERM/EMC GSM EN 301 489-24, ERM/EMC 3G Article 3.2 EN 301 908-1, ERM 3G EN 301 908-2, ERM 3G EN 301 511, GSM |
| MTBF, operating: | 139 000 hours, Bellcore RQGR at 40°C |
| EN 55024: | Electromagnetic compatibility - Immunity IT equipment |
| EN 55024 + A1 + A2: | Electromagnetic compatibility - Immunity IT equipment |
| EN 55022: | Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement. |
| EN 55022 +A1: | Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement. |
| FCC part 15: | Class B |
| Safety: | UL/IEC/EN 60950-1, IT equipment |
| Temperature, operating: | 0 to +55ºC (32 to +131ºF) |
| Temperature, storage: | –40 to +85ºC (–40 to +185ºF) |
| Humidity, operating: | 5 to 95% relative humidity |
| Humidity, storage : | 5 to 95% relative humidity |
| Enclosure: | Pressed steel |
| Dimensions (W x H x D): | 210 x 41 x 145 mm (8.3 x 1.6 x 5.9 in) |
| Weight: | 0.9 kg |
| Degree of protection: | IP 30 |
| Cooling: | Convection |
| Mounting: | Horizontal on 35 mm DIN-rail or flat on level surface |
| Rated voltage: | 11 – 58 VDC |
| Operating voltage: | 11 – 58 VDC |
| Rated current: | 1500 mA @ 12 VDC |
| Rated frequency: | DC |
| Electrical specification: | EIA RS-232 |
| Data rate: | 300 bit/s – 115.2 kbit/s |
| Data format: | 7 or 8 data bits, Odd, even or none parity, 1 or 2 stop bits |
| Protocol: | Transparent, optimised by packing algorithm |
| Circuit type: | SELV |
| Transmission range: | 15 m / 49 ft |
| Connection: | 9 pin D-sub female |
| Shielded cable: | Not required |
| Conductive housing: | Yes |
| Number of ports: | 4 |
| Frequency bands : | 850 MHz – 2100 MHz |
| Connection: | SMA female, impedance |
| Electrical specification: | 3 volts SIM supported |
| Number of slots: | 2 |
| Electrical specification: | USB 2.0 host interface |
| Data rate: | Up to 12 Mbit/s (full-speed mode) |
| Circuit type: | SELV |
| Maximum supply current: | 500 mA in total for both ports |
| Connection: | USB receptacle connector type A |
| Number of ports: | 1 |