HU | RO

MR-210

Other
MR-210

Remote access removes boundaries, eliminates the need for time consuming site visits and provide a network infrastructure suitable for today’s “always-on” society. The MR-210 mobile broadband GPRS / EDGE router uses the Internet to cost effectively inter-connect systems, allowing HMI, PLCs, sensors etc to communicate with each other.

The dual SIMs ensures high availability for critical applications. Bundle the mobile broadband GPRS with ADSL devices, Falcon or DR-260, for both wired and wireless access.

Devices connected to the Internet require countermeasures towards cyber threats. The MR-210 offers protection of transmissions from malicious eavesdroppers via encrypted communication tunnels (VPN, optional upgrade), access prevention from unauthorized addresses, and extensive logging to detect intrusion attempts. With an advanced and highly configurable firewall the unit is easily set up to only allow valid application data.

The MR-210 with its built-in serial port offers a simple modem replacement solution with the benefit of not having to reprogram or change any other component. The powerful software in the MR-210 offers methods to engineers to easily analyze the data-flow, valuable for fast troubleshooting of connected devices.
The MR-210 supports GPRS and EDGE and is equipped with one serial port and one Ethernet port.

Status: Active
Article number: 3622-0201
Ports: 1 x 10 Mbit/s or 100 Mbit/s., Ethernet TX, RJ-45.
1 x 300 bit/s to 115.2 kbit/s, D-sub, RS-232.
2 x SIM slots.
1 x USB.
Description: Mobile broadband router
Warranty period: 5 Years
R&TTE: Article 3.1a
EN 60950, Safety
EN 50385, EMF exposure
Article 3.1b
EN 301 489-1, ERM/EMC
EN 301 489-7, ERM/EMC GSM
EN 301 489-24, ERM/EMC 3G
Article 3.2
EN 301 908-1, ERM 3G
EN 301 908-2, ERM 3G
EN 301 511, GSM
MTBF, operating: 203 000 hours, Bellcore RQGR at 40°C
EN 55024: Electromagnetic compatibility - Immunity IT equipment
EN 55024 + A1 + A2: Electromagnetic compatibility - Immunity IT equipment
EN 55022: Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement.
EN 55022 +A1: Information technology equipment. Radio disturbance characteristics. Limits and methods of measurement.
FCC part 15: Class B
Safety: UL/IEC/EN 60950-1, IT equipment
Temperature, operating: –20 to +60ºC (–4 to +140ºF)
Temperature, storage: –40 to +85ºC (–40 to +185ºF)
Humidity, operating: 5 to 95% relative humidity
Humidity, storage : 5 to 95% relative humidity
Enclosure: Pressed steel
Dimensions (W x H x D): 173 x 36 x 119 mm (6.8 x 1.4 x 4.7 in)
Weight: 0.9 kg
Degree of protection: IP 40
Cooling: Convection
Mounting: Horizontal on 35 mm DIN-rail or flat on level surface
Rated voltage: 9 – 48 VDC
Operating voltage: 9 – 48 VDC
Rated current: 1500 mA @ 12 VDC
Rated frequency: DC
Electrical specification: EIA/TIA-232
Data rate: 300 bit/s – 115.2 kbit/s
Data format: 7 or 8 data bits, Odd, even or none parity, 1 or 2 stop bits
Protocol: Transparent, optimised by packing algorithm
Retiming: Yes
Transmission range: 15 m / 49 ft
Connection: RJ 45
Shielded cable: Not required
Number of ports: 1
Frequency bands : 850 MHz – 2100 MHz
Connection: SMA female, impedance
Electrical specification: 3 volts SIM supported
Number of slots: 2
Electrical specification: USB 2.0 host interface
Data rate: Up to 12 Mbit/s (full-speed mode)
Circuit type: SELV
Maximum supply current: 500 mA in total for both ports
Connection: USB receptacle connector type A
Number of ports: 1
@ 2013 Westermo | A Beijer Electronics group company | Legal Notice